Sony IT-ID20 Mode D'emploi page 25

4
Press (PGM).
"ENTER NUMBER" appears on the display.
5
Enter the phone number by pressing the dialing
keys.
You can enter up to 20 digits, including a tone
and a pause, each of which is counted as one
digit.
6
Press (PGM).
The name and the number are stored.
display returns to "NEW OLD" of the initial
mode.
Notes
• If you intend to store a 51st phone number, "MEMORY FULL" will be
displayed. You cannot store the phone number. To store another phone
number, erase one of the stored phone numbers (see page 27).
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong number in step 5, press (PGM), then start from
the beginning.
• To store a number to be dialed via PBX, follow the steps on page 21 when
entering a phone number.
The
1234567
continued
Telephone Features 25
US