Shiatsu Massage; Problems & Solutions; Cleaning & Maintenance - Inventum MG 190 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4 | shiAtsu mAssAge
The massage must be pleasant and relaxing at all times.
Stop the massage or change the position of the massage
device if you find it is painful or unpleasant.
• Sit comfortably and upright on the seat cover. Ensure
you sit centered and such that the massage heads
can move to the left and right of your spinal column.
• Switch on the massage device with the On/Off button.
Select the region you wish to massage with the
maSSaGE button.
1. Entire back
2. Lower back
3. upper back
4. Stop
The LED lamp indicates the massage region set.
• The Shiatsu massage unit with rotating massage heads
slowly moves upwards
from the starting
position in the lowest
region of the back and
moves up and down in
the massage region set.
application only at a
single point is not
possible, as the
rotational movement
and the displacement
up and down are
coupled.
• The automatic switch-
off function is activated
with selection of the
massage region and is
preset to 15 minutes. you can set the automatic
switch-off function to 5, 10 or 15 minutes by pressing
the TImEr button.
please note that changing the timer setting makes the
timer start to count again from the beginning.
To avoid overheating the device, select the maximum
assage duration at the beginning of the massage
and do not change it again during the massage.
• Do not use the massage device for longer than 15
minutes. The massage can be finished at any time by
pressing the On/Off button. please note that on
switching off, the Shiatsu massage unit firstly returns
to the starting position at the lowest region of the
back. This is indicated by the On/Off LED blinking.
never interrupt the return to the starting position.
Once this position is attained, the device switches off.
• If the device is stopped using the maSSaGE button, it
also returns to the starting position after 15 minutes
and then switches off.
• DO nOT disconnect the device from the mains supply
during operation. always switch it off only once it
has reached the starting position at the bottom.
• Disconnect the power supply unit plug from the mains.
Note
• you can place the hand switch in the storage case
during and after use.
• always wear light clothing when receiving a massage
from the device.
• To receive a more gentle massage, insert a folded
towel between the massage device and your body.
• Do not use the massage device for longer than 15
minutes. Otherwise, using the device for longer can
over-stimulate the muscles and cause tension instead
of relaxation.
• Do not use the massage device just before going to
bed. The massage can also have a stimulating effect
and may cause difficulties in getting off to sleep.
5 | ProBLems & soLutions
Problem
cause
massage heads
The load on the
rotating at
massage heads is too
reduced speed.
great.
massage heads
The massage has
only rotate in
been activated for
the upper or
the limited region.
lower region.
massage
appliance is not
heads are not
connected to the
moving.
power supply.
Device not switched
on.
Transport lock has
not been removed,
the massage
mechanism is
damaged.
Overheating
protection tripped,
device is damaged.
6 | cLeAning & mAintenAnce
always disconnect the device before cleaning it. Only
clean the appliance in the manner specified. Fluid
must never be allowed to enter into the device or
accessories. Do not use the device again untill it is
completely dry.
first unplug the device and allow it to cool off. Then you
can clean it with a cloth which is no more than lightly
moistened. you can also use a mild detergent.
never immerse any part of the device in water or any
other liquid to protect against electrical hazards.
The removable cover is machinewashable at 40°c. please
note the cleaning and care symbols on the label which is
sewn into the cover.
Handle the device with care, protect the device from
impact with hard objects and do not drop it.
18
solution
reduce the contact
pressure on the
head.
press the maSSaGE
button to change/
expand the region.
connect the plug
to the mains supply
and switch on the
appliance.
Switch the device on
with On/Off. Select
the massage region.
contact your
authorized dealer or
the service adress.
contact your
authorized dealer or
the service adress.

Publicité

Table des Matières
loading

Table des Matières