Product Description And Specifications - Bosch AdvancedOrbit 18 Notice Originale

OBJ_BUCH-2926-001.book Page 14 Friday, August 12, 2016 1:27 PM
14 | English
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding of wood, plastic,
metal, filler as well as coated surfaces.
Machines with electronic control are also suitable for polish-
ing.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Thumbwheel for orbit frequency preselection
2 On/Off switch
3 Battery charge-control indicator
4 Battery pack*
5 Dust box, complete (Microfilter System)
6 Sanding plate
7 Auxiliary handle (insulated gripping surface)
8 Battery unlocking button*
9 Handle (insulated gripping surface)
10 Sanding sheet*
11 Alignment aid for sanding sheet*
12 Screws for sanding plate
13 Sanding-plate base
14 Extraction outlet
15 Filter element (Microfilter System)
16 Vacuum hose*
17 Screw for auxiliary handle
18 Wing nut
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 2LK | (12.8.16)
Technical Data
Random Orbital Sander
Article number
Rated voltage
Preselection of orbital stroke
rate
No-load speed n min
0
No-load orbital stroke rate min
Orbit diameter
Sanding plate diameter
Weight according to EPTA-
Procedure 01:2014
Permitted ambient
temperature
– during charging
**
– during operation and
during storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted sound pressure level of the product
is 77 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-4:
2 2
a =4.5 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
AdvancedOrbit 18
3 603 CD20..
V= 18

-1
3000 – 12000
-1
6000 – 24000
mm 3.2
mm 125
1.7 (1.3 Ah)–
*
kg 1.8 (2.5 Ah)
°C 0...+45
°C – 20...+50
PBA 18V ...W–.
PBA 18V ...V–.
AL 18.. CV
Bosch Power Tools