Changing The Transmission Frequency; Modulation Level; Dynamic Control; Text Scroll - Kenwood KCA-R71FM Mode D'emploi

Changing the Transmission Frequency

Select the frequency.
Display Setting
"T-FREQ 87.7" 87.7 MHz
"T-FREQ 87.9" 87.9 MHz
"T-FREQ 88.1" 88.1 MHz
"T-FREQ 88.3" 88.3 MHz (Initial setting)
"T-FREQ 88.5" 88.5 MHz
"T-FREQ 88.7" 88.7 MHz
"T-FREQ 88.9" 88.9 MHz
"T-FREQ 89.1" 89.1 MHz
"T-FREQ 89.3" 89.3 MHz
"T-FREQ 89.5" 89.5 MHz
"T-FREQ 89.7" 89.7 MHz
"T-FREQ 89.9" 89.9 MHz
Some car radios cannot receive a 87.7 MHz frequency.

Modulation level

Select the modulation level.
Display
"MOD LEVEL 1"
"MOD LEVEL 2" (Initial setting)
"MOD LEVEL 3"
"MOD LEVEL 4"

Dynamic control

Setting the Dynamic control.
Display
"D-CONT ON"
"D-CONT OFF"
The unit comes with the prevention of distortion function to
reduce sound distortion.
If the sound is distorted severely, press the [4] or [¢] button
on the display unit and then set the function to "ON". If the
prevention of distortion function is set to "ON", the sound
extension is reduced.
If a disc with a high recording level is used, the sound may distort
even if the prevention of distortion function is set to "ON". In this
case, reduce the modulation level.

Text Scroll

Setting the displayed text scroll.
Display
"SCROLL MANU"
"SCROLL AUTO"
The texts scrolled are shown below.
• CD text
• Song title/ Artist name/ Album title/ Category name
• MD title
— 9 —
Setting
The dynamic control is ON.
The dynamic control is OFF. (Initial setting)
Setting
Doesn't scroll.
Scrolls when the display changes.