Adjusting Water Jet - FLORABEST FSA 25 A1 Traduction Du Manuel D'utilisation Original

the beginning and
5cm at the end) to
unlock.
Note: The lock and
unlock alternates on the
whole length, you can
repeat above actions to
engage lock and unlock
function alternatively.
During rolling up
1. Stop rolling up at
desired length and
pull out the outlet hose
a short tug (10cm at
the beginning and
5cm at the end).
2. Allow the outlet hose
(9) return slowly to
lock. If not, pull out
the outlet hose a short
tug (10cm at the
beginning and 5cm
at the end) again and
allow the outlet hose
(9) return to lock
3. Pull out the outlet hose
a short tug (10cm at
the beginning and
5cm at the end) to
unlock.
Note: The lock and
unlock alternates on the
whole length, you can
repeat above actions to
engage lock and unlock
function alternatively

Adjusting water jet

H
Warning! Do not
direct the water
jet towards electric
equipment!
Do not direct the
water jet towards
persons or animals!
1.Use one hand to hold
the jet holder (11).
2.Use another hand
a) to turn the jet
adjustment bar (12)
clockwise to reduce
the water spray from
line to splash, to the
end to stop the water
spray.
b) to turn the jet
adjustment bar (12)
counter-clockwise to
enlarge the water
spray from splash to
GB IE
.
83