Instructions On Correct Machine Use; Machine Warnings; Prohibited Use - Kunzle & Tasin Bona Capricorn Manuel D'utilisation

Instructions on Correct Machine Use

Read this manual carefully and become familiar with
the machine. The equipment is suitable for industrial use
(e.g. in hotels, schools, hospitals, offices, factories and
shops).
The following information highlights particularly hazardous
situations for the operator and/or machine. Understand when
these conditions may be present. Removing safety features
1)
Keep hands and clothes away from rotating parts.
2) Keep hands on the handle when the motor is operating.
3)
DO NOT leave the machine unattended when the motor is
operating.
4) Always disconnect the power supply cable from the
machine before performing maintenance.
5) Transport the machine with care, due to the heavy weight of
the individual parts making up the machine.
6) Always use the machine in well-ventilated areas.
7) Always keep the work area well-lit.

Machine Warnings

Prohibited use

Children should be supervised
to ensure that they do not
play with the appliance. This
machine is not intended for
use by persons (including
children) with reduced
physical, sensory or mental
capabilities, or lack of
experience and knowledge
unless they have received
instructions regarding the
use and are supervised by a
person responsible for their
safety.
This equipment is not suitable
for collecting hazardous dust.
Using the machine to move
objects or moving on an incline
may cause injury or damage.
The machine must only be
used to sand dry floors which
are level or have a maximum
incline of 2%. DO NOT use the
machine to sand furniture.
could cause death or physical injury. Take all steps necessary
to instruct personnel who may use the machine. Report any
damage on the machine or incorrect operation immediately.
8)
Always dispose of the sanding dust appropriately.
9) DO NOT detach the dust bag when the motor is operating.
10) Always dispose of the sawdust appropriately.
11) Use the type and amount of abrasive specified in the
instruction manual.
12) The use of accessories other than those recommended in
this manual may cause injury.
13) The machine is for indoor use only.this manual may
cause injury.
Bona Capricorn Manual
Work surfaces may be
seriously damaged if the
machine is left turning on
one point while the tool is in
contact with the surface. To
avoid damaging the surface
approach the cutting line
carefully. DO NOT stop when
lowering and raising the
equipment, keep moving at
constant speed.
13
EN