Technical Data; Appropriate Use - Hazet 9032-1 Mode D'emploi

Air inlet thread
Collet chuck
Max. free speed
Weight
Recommended hose diameter mm
Air consumption
Working pressure
Sound pressure level
Sound power level
Vibration acceleration
Total length
Speed control
The HAZET pneumatic die grinder is a handy tool driven by compressed air. It has been designed
for the professional use.
The die grinder is especially appropriate for grinding, polishing, burnishing and deburring. It can
be used on vehicles, agricultural machinery and in the industry, particularly in areas with restricted
access.
The ergonomic, cold-insulated HAZET handle provides a good grip and allows comfortable wor-
king even in confined spaces.
With its 90° angle head, HAZET 9032-5 even reaches the most confined areas.
The exhaust air is expelled through the handle's back.
The connection to the compressed-air supply with a quick-release coupling directly at the device
is not permissable. Between tool and quick-release coupling has to be connected an intermedi-
ary air hose of 20 cm length minimum.
Do not leave plugged-in pneumatic tools unattended.
Always wear personal protective clothing and safety equipment.

Technical Data

9032-1
mm
rpm 25000
kg 0.5
10
l/min 113
bar 6,2
dB(A) 91
dB(A) 98
2
m/s 4.53
mm 158

Appropriate Use

Technical data are subject to change without notice
1 ⁄ ˝
4
6
x
USA GB
9032-5
1 ⁄ ˝
4
6
22000
0.38
10
113
6,2
90
97
1,24
160
x
9