For Your Safety - Hazet 9032-1 Mode D'emploi

GB USA
Dear Customer,
You have made a good choice.
This HAZET tool in front of you is
a high-quality product that will
make your work easier.
General information
safety tips:
• Please take care that the user of this tool
carefully reads through these operating
instructions and understands all information
given in there before the first use.
• These operating instructions contain impor-
tant advices that are necessary for a safe
and trouble-free operation of your HAZET
Pneumatic Die Grinder.
• For this reason, always keep these operating
instructions together with your HAZET
Pneumatic Die Grinder.
• This tool has been designed exclusively for
particular applications. HAZET emphasizes
that any modification of this tool and/or an
application that does not correspond to its
intended application are strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damages to property that are due
to an improper application or misuse of this
tool respectively due to the disregard of the
safety instructions.
Attention: Please pay attention to these
symbols!
Read the Operating Instructions!
The operator is obliged to observe
the operating instructions and has to
instruct all users of the pneumatic
tool according to the information
given in this manual.
Attention!
This symbol marks important specifi-
cations,
safety risks respectively safety advi-
ces.
Do not leave plugged-in pneumatic tools unattended.
Always wear personal protective clothing and safety equipment.
10

For Your Safety

and
dangerous conditions,
Technical data are subject to change without notice
• Wear work gloves and eye protection.
Pneumatic tools can raise chips, dust and
other abraded particles at high speed, what
may result in
Compressed air is dangerous. The air flow
may cause harm to sensitive parts of the
body like eyes, ears etc. Dust and objects
being raised by the air flow may cause inju-
ries.
• Use ear protection. Long exhibition to the
working noise of a pneumatic tool may result
in a permanent hearing loss.
• Wear face or dust mask. Breathing in the
steam of some materials like adhesives and
tar that contain dangerous chemicals can
cause serious harms.
• Wear proper-fitting protective clothing.
Tools with rotating parts, e.g. grinding
wheels or other grinding accessories etc.
can get caught in the hair, clothing, jewellery
or other loose objects what may result in
severe injuries. Never wear too large clothing
and/or clothing with bands or loops which
may get caught in the rotating parts of the
tool. During the work take off jewellery, wat-
ches, identification tags, bracelets, neckla-
ces etc. that could get caught in the tool.
Never touch the moving parts of a tool. Long
hair should be covered or tied together.
• Keep children away from pneumatic
tools. Unattended tools or tools that are
connected to the compressed air supply
may be used by non-authorized persons and
could injure them or other persons.
• Use perfect grinding wheels, grinding
accessories, etc. only. Low-quality, unsui-
table or defective grinding wheels, grinding
accessories, etc. may loosen during operati-
on and can be flung throughout the work
area what may result in very severe injuries.
• Only use grinding accessories, grinding
wheels, etc. that are approved for the tool's
speed.
• Pay attention to the tool's maximum
speed. Take care that the die grinder's maxi-
mum speed never exceeds the maximum
speed of grinding wheels or grinding acces-
sories.
severe eye injuries.