Télécharger Imprimer la page

Beta 1461/C7B Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
Engine number
D4F 702, D4F 704, D4F 706, D4F 708, D4F 712, D4F
714, D4F 716, D4F 722, D4F 728, D4F 730, D4FT 782
K4J 730, K4J 732, K4J 740,K4J 780
K4J 714,K4J 750, K4J 770,K4J 780
K7J 710
K4J 700, K4J 710, K4J 711, K4J 712, K4J 713, K4J 715
K4M 710, K4M 711, K4M 714, K4M 716, K4M 718,
K4M 760, K4M 761, K4M 766, K4M 782, K4M 800,
K4M 801, K4M 824, K4M 848, K4M 854, K4M 858,
K4M 700, K4M 708, K4M 720/4, K4M 730, K4M 732,
K4M 734, K4M 740, K4M 742, K4M 743, K4M 744,
K4M 745, K4M 746, K4M 748, K4M 752,K4M 753
K4M 790, K4M 791, K4M 792, K4M 794, K4M 802,
K4M 804, K4M 812, K4M 813
K7M 710, K7M 744, K7M 745, K7M 850
F4P 720, F4P 722, F4P 770, F4P 771, F4P 772, F4P 773,
F4P 774, F4P 775
F3R 751, F3R 750, F3R 791, F3R 796, F3R 797, F3R 798
F4R 712, F4R 713, F4R 714, F4R 715, F4R 720, F4R721,
F4R 730, F4R 732, F4R 744, F4R 770, F4R 771,
F4R 790, F4R 791, F4R 792, F4R 820, F4R 830,
F4RT 774, F4RT 776, F4RT 794, F4RT 795, F4RT 796,
F4RT 797, F4RT 870, F4RT 874
F4R 740, F4R 741
F4RT 764, F4RT 765, F4RT 786, F4RT 787, F4RT 810, F4RT 811
Safety Precautions - Please read
• Disconnect the battery earth leads (check radio code is available)
• Remove spark or glow plugs to make the engine turn easier
• Do not use cleaning fluids on belts, sprockets or rollers
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been removed (unless
specifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand and to re-check the camshaft and crankshaft
timing positions.
• Crankshafts and Camshafts may only be turned with the chain drive mechanism fully installed.
• Do not turn crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle manufacturer's service manual or a suitable proprietary instruction book
• Incorrect or out of phase engine timing can result in damage to the valves
• It is always recommended to turn the engine slowly, by hand, and to re-check the camshaft and crankshaft
timing positions
6
OEM item number
MOT
MOT
MOT
1054
1496
1750
MOT
MOT
1750
1490-01

Publicité

loading