Playing Music Via Usb - THOMSON MIC200BT Mode D'emploi

Program play
The tracks on the disc can be programmed to play in any order (up to 20 tracks can be programmed).
Note: this can only be done while in Stop mode.
1. Press the PROG/REP/PRESET button while in Stop mode. "PROG P01" will appear on the display.
2. Press "PREV" and "NEXT" button to select the desired tracks, then press the PROG/REP/PRESET
button to store into memory.
3. The first track number is now stored into memory, and the program number changes to "P02",
waiting for your next selection.
4. Repeat steps 2 – 3 to program additional tracks.
After programming is complete, press the PLAY/PAUSE/SCAN button, and program play begins
from the first programmed track. The player stops automatically once all programmed tracks have
been played (press the STOP/SELECT button to cancel the programmed tracks memory).

Playing Music Via USB

This device has been developed in line with the latest technical advances in the USB field. However,
given the wide range of USB storage devices of all types that are currently on the market, we
unfortunately cannot guarantee full compatibility with all USB storage devices. For this reason, in rare
cases, there may be problems in playing back files from USB storage devices. This is not due to device
malfunction.
1. Press the POWER/MODE button repeatedly until 'USB' appears on the display
2. Connect a USB storage device directly into the USB port. The display briefly indicates the total
number of tracks. Playback will automatically start after a few seconds.
3. For instructions on how to operate the control buttons, please refer to MP3 DISC SECTION
operations as previously described.
NOTES:
• Always directly connect a USB storage medium to the USB port to prevent malfunctions.
• The USB port is not designed for charging external devices.
• Important: Switch the device to a different operating mode before you remove the USB storage
device.
Equaliser Function
With your unit switched on (not in Standby mode):
Press the MENU/INFO button repeatedly to cycle between off, Eq1 , Eq2, Eq3, and Eq4.
Note: you can set the Equaliser function to Normal, Pop, Classic, Rock, and Jazz according to your
individual preference.
USB Charging (5V Out)
The USB port is designed for charging external devices, such as smart phones.
AUX input jack
1. Press the POWER/MODE button to turn on the unit.
2. Press the POWER/MODE button repeatedly to select Aux In mode. '–AU-' will appear on the LCD
display.
3. Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3
player) to the AUX input jack.
4. Start playback from your personal player.
Wireless charger function (MIC200IBT version only)
Simply place your wireless charging device on the wireless charger area indicated on the top side and
charging will begin on contact.
- EN 9 -