Getting Started; Safety And Notice - THOMSON MIC200BT Mode D'emploi

Cd/bluetooth/fm usb/ entrée audio/ recharge sans fil optionnel
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Contents

Getting Started

Safety and Notice

Getting Started
• Remove the appliance from the box.
• Remove any packaging from the product.
• Place the packaging inside the box and either or dispose of safely.
Safety and Notice
Read and understand all instructions before you use this product. If damage is caused by failure to
follow the instructions, the warranty does not apply.
Safety
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical equipment.
• Keep this apparatus away from direct sunlight, naked Fames or heat.
• Never look into the laser beam inside this apparatus.
• Ensure that you always have easy access to the power cord, plug or adaptor to
disconnect this apparatus from the power.
• The apparatus shall not be exposed to dripping or splashing and no liquid-filled
objects, such as vases, shall be placed on the apparatus.
• To ensure complete disconnection from the power input, the mains plug of the
apparatus shall be disconnected from the mains.
• The mains plug of the apparatus must not be obstructed OR must be easily
accessed during intended use.
• Minimum distances 10 cm around the apparatus for sufficient ventilations.
• The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
• No naked flame sources such as lighted candles should be placed on the apparatus.
• Attention should be drawn to environmental aspects of battery disposal.
• The use of apparatus in moderate climates.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the Point where they exit from the apparatus.
1
1
2
2
3
4
4
5
- EN 1 -
5
5
5
6
6
7
9
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mic200ibt

Table des Matières