Service; Contents Of The Tjep Rc20 Rod Cutter Package; Functions And Applications - TJEP RC20 Rod Cutter Manuel D'utilisation Et D'instructions

• Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly main-
tained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instruc-
tions, taking into account the working conditions and the work to be performed. Use of
the power tool for operations different from those intended could result in a hazardous
situation.

Service

• Have your power tool serviced only by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.

Contents of the TJEP RC20 Rod Cutter package

Upon purchasing the TJEP RC20 Rod Cutter, open the carrying case and check the con-
tents for the following:
1. TJEP RC20 Rod Cutter with blade mounted : 1 unit
2. Removable Side Handle and chip collector attachment: 1 unit
3. Allen Wrenches for Blade Removal and Installation: 1 unit
4. Additional TJEP RC20 blade: 1 unit
5. Operation Manual: 1 copy
6. Extra set of electrical brushes
If anything is missing or damaged please do not return this packaged unit to the distribu-
tor, please call Kyocera Unimerco Fastening: +45 9714 1440.

Functions and Applications

This section describes the functions, applications, service environment and other aspects
of the TJEP RC20 Rod Cutter
TJEP RC20 Rod Cutter is a power tool developed for fast and efficient cutting of various
ferrous and non-ferrous materials. This multipurpose tool can be used by a variety of con-
tractors however the primary design was for flush cutting or free cutting reinforcing bars,
coil rod and all- threaded rod used in the construction industry.
Application of the Tool - Actual areas of application the TJEP RC20 Rod Cutter is used for
are as follows:
14