Safety Instruction - General Safety Rules; Work Area Safety; Electrical Safety - TJEP RC20 Rod Cutter Manuel D'utilisation Et D'instructions

Please read this manual before operating this tool.
Purpose of this manual: This manual is intended to provide users with correct knowl-
edge and the procedures for operation, maintenance and inspection of the tool, a mul-
tipurpose flush cutting saw for cutting reinforcing bar, coil rod, all-threaded rod, pipe,
tubing, and conduit. Improper use of the tool may possibly lead to a serious accident.
Therefore, always read this instruction manual before using the tool to familiarize yourself
with its correct usage, operating method, warnings, etc.

Safety Instruction - General Safety Rules

Warning! Read and understand all instructions. Failure to follow all instructions
!
listed below may result in electric shock, fire and/ or serious personal injury.

Work Area Safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
• Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.

Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfac- es such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entan-
gled cords increase the risk of electric shock. Replace damaged cords.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
12
PLEASE SAVE THESE INSTRUCTIONS!