Hansgrohe Croma Showerpipe 27169 1 Série Instructions De Montage / Mode D'emploi / Garantie page 6

1
1
3
2
3
3
6
2
¾ "
2
1
English
Installation
The showerpipe must be installed with showerpipe
rough set 16181181 (not included).
To insure correct operation of the
thermostatic mixing valve, the hot
supply must be on the left and the
cold supply must be on the right.
Turn the water off at the main.
Remove the spacing jig, nuts, and plugs.
Confirm that the nipples are level in all planes and
are parallel to each other.
Mark a point on each nipple ¾" from the surface of
the finished wall
Carefully cut the nipple at this point.