vitapur VWD9506W Guide D'utilisation page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Draining the Reservoirs:
IMPORTANT! Unplug the dispenser before performing this procedure. Dispense hot water until temperature
drops to a safe level to avoid the risk of scalding.
1. Turn off the water supply, using manual shut-off valve at the rear of the dispenser.
2. Press both dispensing buttons until water stops flowing.
3. Place a container/bucket beneath the drain valve located at the rear of the dispenser (See Fig. 18).
4. Remove the drain cap and plug from the drain valve and let the remaining water flow into the container/bucket.
Replace the cap and plug.
Going Away on Vacation:
When not using the dispenser for long periods of time or when going on vacation, unplug the dispenser and drain the
reservoirs (see Draining the Reservoirs). Follow Initial Product Cleaning Procedures upon return and startup of the
dispenser.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vwd9506bls

Table des Matières