Information On Safety - Dantherm MASTER BCF 230RB Manuel D'utilisation Et De Maintenance

en
1... SAFETY INFORMATION
it
2... UNPACKING
de
3... ASSEMBLY AND INSTALLATION
(ONLY FOR QUALIFIED PERSONNEL)
es
4... ANOMALIES
fr
5... CLEANING AND MAINTENANCE
nl
6... FUNCTIONING ANOMALIES
pt
da
fi
IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL PRIOR
no
TO ASSEMBLING, STARTING UP OR CONDUCTING MAINTENANCE ON THIS
COOLER. USING THE COOLER INCORRECTLY CAN CAUSE SERIOUS OR FATAL
sv
INJURIES. KEEP THIS MANUAL FOR FURTHER REFERENCE.
pl
►►1. INFORMATION ON
ru
SAFETY
cs
IMPORTANT: This appliance is not
hu
suitable for use by persons (including
children) with
sl
sensory and mental capacities or
tr
with lack of experience or knowledge
unless supervised
hr
responsible for their safety. Children
lt
must be supervised to make sure they
do not play with the appliance.
lv
►1.1. During installation, the electrical
et
connection, water connection, use
and maintenance of the cooler,
ro
comply with all local regulations
sk
and standards in force.
►1.2. The cooler must only be
bg
installed, adjusted and serviced by
uk
qualified personnel.
►1.3. Use this appliance to cool,
bs
dehumidify, ventilate or remove
el
dust.
zh
►1.4. In order to prevent the risk of
fire or serious injuries, install the
cooler at a safe distance from heat
sources (fireplaces, fire, etc.), from
sparks (welding machines, electrical
panels, etc.) or from combustion
fumes (hoods, chimney flues, etc.).
PARAGRAPH SUMMARY
reduced physical,
by a person
►1.5. Improper wiring or improper
installation can cause hazards or
serious damage.
►1.6. Before carrying
operation, make sure that the
cooler, the power supply cable, the
control panel, etc., are perfectly dry,
in order to prevent any hazard or
serious damage (never work with
wet hands).
►1.7. Only install outdoors.
►1.8. The cooler must be installed
on a stable and level structure, so
as to prevent any risk (the structure
and the plugs must be adequate to
support the weight of the appliance).
►1.9. The minimum safety distance
recommended between the cooler
and walls or other items is 0.5 m.
►1.10. A 0.8 m outlet for every 3,600
2
m /h of air supplied to the cooler
3
must be provided (always ensure
an exchange of air within the cooled
environment). In the event of forced
air ventilation, the amount extracted
should be less than 85% of the air
intake. Forced ventilation can be
combined with natural ventilation.
►1.11. Power the cooler solely with
the voltage and frequency specified
out any