Information On Safety; Important - Dantherm MCS MASTER BCB 19 Manuel D'utilisation Et De Maintenance

en
►►1. INFORMATION ON
SAFETY
(Fig. 1)
IMPORTANT: READ AND UNDER-
STAND THIS OPERATIONAL MANUAL
BEFORE ASSEMBLING, COMMISSION-
ING OR PERFORMING MAINTENANCE
ON THIS APPLIANCE. INCORRECT USE
OF THE APPLIANCE CAN CAUSE SERI-
OUS INJURY. KEEP THIS MANUAL FOR
FURTHER REFERENCE.
IMPORTANT: This appliance is not
suitable for use by persons (including
children) with reduced physical, sensory
or mental capacities or who lack experi-
ence or knowledge unless supervised
by a person responsible for their safe-
ty. Children must be monitored to make
sure they do not play with the appliance.
►1.1. Only fill the cooler tank only with
clean water.
►1.2. Before carrying out any opera-
tion, make sure the cooler, including
the power supply cable and the con-
trol panel are perfectly dry, in order
to avoid any risk.
►1.3. After filling the tank, handle the
cooler carefully.
►1.4. Comply with all local legislation
and current regulations when using
the cooler.
►1.5. Keep the cooler dry, in order to
avoid electric shocks. Hands must al-
ways be dry.
►1.6. Use only in ventilated and dry ar-
eas.
►1.7. For indoor use only.
►1.8. Only power the cooler with the
voltage and frequency as specified
on the nameplate.
►1.9. Do not cover the cooler with pa-
per, cardboard, plastic, metal sheets
or any other inflammable material
during use, in order to prevent any
risk.
►1.10. The cooler must be used on a
stable and levelled surface, in order
to prevent any risk.
►1.11. Disconnect the cooler from the
mains power supply when not in use.
►1.12. Never block the cooler's air
vents or the air outlet.
►1.13. The minimum safety distance
recommended between the cooler
and walls or other items is 0,5 m.
►1.14. Never move or conduct mainte-
nance on the cooler when it is con-
nected to the mains or in operation.
►1.15. The cooler (power cable includ-
ed) must be kept at a suitable safety
distance from heat sources.
►1.16. In any case, the cooler must be
opened and/or repaired by author-
ised after-sales centre.
►1.17. If the power supply cable is
damaged, it must be replaced by a
technical support centre to prevent
any risk.
►1.18. In the event of incorrect cooler
operation, immediately disconnect
the electrical power supply and con-
tact the support centre.
►1.19. Protect the power cable from
potential damage caused by the
movement of vehicles or pedestri-
ans. Improper connection to electri-
cal voltage or improper installation
may result in electric shocks.
►1.20. Conditions of use:
A) Temperature of the air: 18°C - 45°C;
Temperature of the water: <45°C.
B) The air must be free of dust and
pollutants, otherwise cleaning must
be carried out more frequently.
►1.21. The water used to fill the cooler
tank must come from an aqueduct.
If it is not possible to draw from an
aqueduct, the water introduced must
be subjected to a sanitation treat-
ment, according to European Direc-
tive 98/82/EC.
-We recommend using water with a
hardness of less than 15°f.
-The cooler tank must be emptied
and sanitised periodically depending
on the use.