Using Accessories; Installation Instructions - Waeco PerfectCharge MCP1204 Notice D'utilisation

Using accessories

8 Using accessories
I
NOTE
Accessories are not included in the scope of delivery.
If you have questions regarding the accessories, please contact
your local service partner.
8.1 Storing the battery charger in the wall bracket

Installation instructions

When selecting the installation location for the wall bracket, observe the
following information:
 The wall bracket must be installed in a location protected from moisture.
 The wall bracket may not be installed in areas containing flammable
materials.
 The wall bracket may not be installed in dusty environments.
 The device must be installed on a level and sufficiently sturdy surface.
Installing the wall bracket
Install the wall bracket as follows (fig. 5, page 5):
➤ Attach the wall bracket (1) to the installation location you chose.
➤ Attach the adapter (2) to the battery charger (3).
Storing the battery charger
Store the battery charger as follows (fig. 5, page 5):
➤ Push the battery charger (3) along with the adapter into the cone-shaped
brackets from above.
To release it, lift the battery charger upwards out of the brackets.
38
PerfectCharge MCP1204/1207
EN