Cleveland KGL-40 Manuel De L'opérateur page 4

ELECTRICAL
NOTE: Ensure the electrical supply matches the kettle's requirements as stated on the rating
label.
This kettle is built to comply with CE standards. Many local codes exist, and it is the responsibility
of the owner and installer to comply with these codes.
NOTE: Maximum voltage for LVD is 440 volts for CE marked appliances.
Remove the console cover. A wiring diagram is affixed to the underside of the cover. Feed
permanent copper wiring through the cut-out in the rear or bottom of the console, and fasten to
the terminal block. Be sure to connect the ground wire to the separate ground terminal connector
(ground lug). Replace console cover.