visomat comfort 20/40 Mode D'emploi page 37

Brief instructions for use
3. Inflating the cuff
Press the Start/stop button. The machine
will carry out a function test and all display
elements will be visible.
The cuff will be inflated and the blood
pressure and pulse will be measured dur-
ing inflation. The "❤" symbol will flash
and beep to indicate the pulse frequency.
Inflation will stop as soon as the values
have been recorded and the cuff will auto-
matically be deflated. A long beep denotes
the end of the measuring cycle.
The systolic and diastolic blood pressure
readings will appear in the display with
your pulse.
4. Switching the machine off
Press the Start/stop button. The readings
will be stored in the memory automati-
cally.
B
GB-37