visomat comfort 20/40 Mode D'emploi page 39

Display unit operation
Left-handed users can fit the cuff to their
right arms (observing the general sense of
instructions). Tighten the cuff by pulling its
free end and placing it over the Velcro fas-
tener. After applying the cuff, you should
be able to insert two fingers between arm
and the cuff. Insert the air plug of the cuff
into the display unit's air socket. Lay your
left arm on a dining table with the palm
turned upwards. It is necessary to keep it
still during the measurement. Do not talk.
Please note:
The cuff may only be inflated when it is at-
tached to the arm.
Please note:
Inaccurate readings may result if the cuff is
fitted too tightly or too loosely.
Circulation in the upper arm may be re-
stricted affecting the readings if you wear a
shirt or roll up your sleeves.
A C
GB-39