König Electronic DVB-S2 REC10 Mode D'emploi page 7

Main Menu
Make sure that you have properly installed and connected the cables of the receiver. If the receiver is
in factory status or if there is no programme list when the device is switched on, the Main Menu
window will be displayed on the screen.
During normal TV/Radio mode, press the MENU key on the RCU to enter the Main Menu window.
This menu consists of 6 main menus:
- Edit Channel
- Installation
- System Setup
- Tools
- Games
- REC
The OK key confirms a selection and the LIST key shows a Down List Box if the column has a
mark. You can also use the numeric keys on the RCU to enter a numeric value.
Use the PR+ and the PR- key to move upwards and downwards and from one line to another line. Use
the keys to move from the main menu to the sub menu and to move from left to right or vice
versa.
If you want to exit the menu system, please press the MENU or EXIT key on the RCU.
If there is no programme, you cannot exit the Main Menu window by pressing the MENU or EXIT key.
Main menu
Edit Channel
Installation
System Setup
Tools
Sub menu
TV Channel List
Radio Channel List
Delete channels by satellite
Antenna Connection
Antenna Setup
Multi Satellite Search
Language
Local Time Setting
Parental Lock
Favourite
Display Setting
Information
Conditional Access
Network Local Setting
Upgrade by Network
RSS Reader
7
Satellite List
Single Satellite Search
TP List
TV System
Timer Setting
OSD Setting
Other
Factory Setting
Upgrade by USB
WiFi Manager
Weather Forecast