Instructions For Assembly - Dutchblue 5060 Mode D'emploi

Safety Instructions:
• DO NOT stand or step on the footrest, as the chair will tip forward possibly causing injury to the
User. The footrests cannot bear heavy loads and are not intended or designed as a step.
• DO NOT lean forward or sideways out of the chair as this may cause the chair to tip.
• DO NOT wheel the chair down an incline without a caregiver who can control the chair during its
descent.
• DO NOT use the chair castor wheel locks as brakes when travelling down inclines.
• DO NOT position the chair sideways on a slope as this could cause it to tip.
• Never use the foot rest to assist with transfers. This could cause the chair to tip forward. The
footrest should be folded away during transfers to provide unobstructed access to the chair.
• DO NOT stand on the footrest as it is designed to provide support for the user's feet while seated
and not to act as a load bearing component when the user mounts or alights from the chair.
Standing on the footrests could cause the chair to tip forward.
• The fasteners – knobs, nuts, bolts, washers – should be checked periodically to ensure that they are
securely fastened.

Instructions for assembly:

1. Insert caster legs into leg frame. Ensure all
push pins are set at the same height location
to ensure the wheeled base is leveled and
does not rock when sitting on all 4 caster
wheels.
Note: Caster legs differ between front & rear.
Ensure the correct ones are used.
2. Put the seat frame on top of the leg frame and
secure in position by screwing in the 4 fixing
knobs.
Note: This part may come pre-assembled
from the factory.
8
ENGLISH
16
dutchblue.com dutchblue.com
15