Caster Wheels; Seat Height Adjustment - Dutchblue 5060 Mode D'emploi

A commode deflector is able to be fitted to
the commode bucket after the bucket is fitted
to the chair. The deflector may be fitted after
the user is seated to allow easier transfers of
the user to and from the chair. You can also
fit the deflector without the bucket by sliding
it into the factory fitted clips on the seat base.
The chair is now fully assembled and ready
for use.
Operation:

Caster Wheels

All caster wheels can be locked and
unlocked by depressing the foot brake
pedal on each caster wheel. All caster
wheels should be locked during the
transfer of the user to and from the
chair.
The caster wheels should be rotated
outwards towards the front and rear of
the chair to make the chair more stable
during transfers.

SEAT HEIGHT ADJUSTMENT

The chair may be adjusted to have a
higher seat height at the front and lower
at the back to suit user requirements. This
can be accommodated by adjusting the
front caster leg only to be extended
further than the rear caster leg. Under no
circumstances should there be more than
1-adjustment position difference between
front and rear (approximately 20mm).
ENGLISH
dutchblue.com dutchblue.com
11 5