Seat Cushion - Dutchblue 5060 Mode D'emploi

To lock the armrests just push the armrest
back down into the lowered position and slide
the lock back to its original position. Ensure
the slide lock is fully over the plastic clip.
To fully remove an armrest from the chair,
depress the push pin fully allowing the
armrest to be pulled outwards from the seat
frame tube. To re-fit the arm, reverse this
action.

SEAT CUSHION

The seat cushion can be removed for cleaning
or to change from open front to one of the
accessory options with open side or closed
front by releasing the seat fixing knobs
underneath the seat cushion.
COMMODE BUCKET AND
COMMODE DEFLECTOR
Connectors hold the commode bucket to
the chair and are factory assembled to the
underside of the cushion. Slide the
commode bucket in from the rear of the
chair and locate the bucket into the
slide/connectors. Push the bucket in until
it stops against the connector end.
A commode deflector can be fitted to the
front of the commode bucket if required,
after the bucket has been fitted to the
chair, allowing the user to transfer easily
to the chair prior to fitting the splash
guard. The commode cover should be
used when transferring contents to the
toilet to avoid spills.
ENGLISH
dutchblue.com dutchblue.com
13