Dutchblue 5060 Mode D'emploi page 14

SAFETY RESTRAINTS
A safety restraint is supplied with the chair
and should be used. It can also be used as a
waist restraint if preferred. You can also
purchase an additional harness if you require
waist and chest restraints.
To fit or remove the restraints unscrew the
clamp and remove the belt. Make sure the
clamp is tight enough to prevent the belt
pulling though when refitting.
Clamp bars are fitted to the chair back and at
the lower lap area on the seat frame.
Before use, adjust the length of the safety
restraints to suit the user.
Fit your harness to the holes as shown if
you prefer to use it as a waist restraint.
Fitting two harnesses adds extra support
if necessary.
LEG RESTRAINT
An additional calf strap is supplied with your
chair. We recommend that the supplied
harnesses are installed and used at all times.
To fit, simply wrap your harness around the
footrest support arm as shown, making sure
that the harness is above the locking knob,
this will prevent it from slipping down during
use.
14
ENGLISH
dutchblue.com dutchblue.com