Initial Use - Beurer BY 33 Mode D'emploi

Overview of baby unit
1
2

6. Initial use

Baby unit
Operation with mains part
Position the baby unit so that it is in an elevated position and is not in proxi-
mity to any other devices that may cause interference.
Using the mains part plug, connect the baby unit to a socket.
The device automatically switches on.
The power LED will light up green.
To switch the device off press the ON/OFF button for at least 2 seconds or
unplug the mains part. The power LED will go out.
To switch the device on again press the ON/OFF button for approx. 2 seconds.
Parent unit
Set up the parent unit in the room where you are going to be.
Battery operation – charging
To ensure optimal safety, the parent unit is designed so that it can
only be operated with batteries inserted.
1. POWER LED
2. ON/OFF
3. Microphone
4. Mains part socket (rear)
3
4
25