Accesories; Applicable Standards And Regulations - IKA ULTRA-TURRAX T 50 basic Mode D'emploi

B) Sterilization with moist heat. This denotes the use of a steam jet
pressurized to 2 bar at 120 °C.
C) Sterilization with hot air. Hot-air sterilization is usually performed
at 160 °C or 190 °C.
When ordering spare parts, please state the fabrication number on the
designation plate, the type of unit and the designation of the spare part.
Accessories
• DZM control Rpm counter
• Measuring cable
• R 2723 Telescopic stand
• R 271 Cross sleeve
• DK 50 Flow chamber
For R 50 agitator shaft:
• R 1402 Dissolver disk
• R 1413 Turbine

Applicable standards and regulations

EU Directives
EMC Directive: 89/336/EEC
Machines Directive: 89/392/EEC
EU standards
EN 61010-1:1993, VDE 0411-114
EN 50081:92, EN 55014:93, EN 50082:92, EN 60555:87
EN 292-1, EN 292-2, EN 60 204-1, EN 414
International standards
CAN/CSA C22.2 (1010.1:92), UL 3101-1
22
• R 2722 Stand
• R 261 Cross sleeve
• SV NS 60 Screw clamp
• R 1405 Propeller
• R 1414 Turbine
Warranty
You have purchased an original IKA laboratory machine which meets the
highest engineering and quality standards.
In accordance with IKA warranty conditions, the warranty period is 24
months. For claims under the guarantee please contact your local dealer.
You may also send the machine direct to our works, enclosing the delivery
invoice and giving reasons for the claim. You will be liable for freight costs.
032009