Manual Operation - Orbit 62001 Mode D'emploi Et D'installation

Automatic Watering
Job 97148 62001 Ins. EN/ES/FR
· Press
auto run
: blinking. [See Figure 9] The timer is now programmed and watering will
begin automatically.
FIGURE 9
Note: If auto run is not pressed after programming steps are complete, the
timer automatically returns to the Auto Run position.
Note: If
AUTO RUN
plete, the timer automatically returns to the Auto Run position.
When watering begins, a water droplet with on appears and will count
down the programmed time on the display.
When watering begins, a water droplet with
down the programmed time on the display.

Manual Operation

The Orbit Timer allows you to manually water from 1 to 360 minutes.
. The Auto Run, current time and day is displayed with the
/
M T W T F S S
AUTO/RUN
Figure 9
is not pressed after programming steps are com-
2 n d 3 r d
3:00
PM
appears and will count
ON
3/24/03
16
5:2