Safety Notes; Functional Description - Bosch PKP 18 E Notice Originale

OBJ_BUCH-868-001.book Page 8 Monday, November 3, 2008 12:17 PM
8 | English

Safety Notes

en
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Do not leave the switched on glue gun
unattended.
After use, place down the glue gun in a safe
manner and allow it to cool down complete-
ly before packing it away. The hot nozzle can
cause damage.
Keep the glue gun away from rain or mois-
ture. The penetration of water into the glue
gun increases the risk of an electric shock.
Do not use the cable for pulling the plug out
of the socket outlet. Keep the cable away
from heat or oil. Damaged or entangled
cables increase the risk of an electric shock.
Before each use of the unit, check the glue
gun, cable and plug. If damage is detected,
do not use the glue gun. Never open the
glue gun yourself, and have repairs carried
out only by a qualified repair person using
only identical replacement parts. Damaged
glue guns, cables and plugs increase the risk
of an electric shock.
Wear safety gloves and do not touch the hot
nozzle. Danger of burning.
Do not allow children to use the glue gun
unless under the supervision of an adult.
Children can injur themselves.
When operating the glue gun in damp
environments is unavoidable, use a residual
current device (RCD). The use of a residual
current device (RCD) reduces the risk of an
electric shock.

Functional Description

Intended Use
The glue gun is intended for the quick gluing
of clean, dry and grease-free materials with
hot-melt adhesives.
Use the glue gun only when you fully understand
and can perform all functions without limitation,
or have received appropriate instructions.
1 609 929 460 | (3.11.08)
Product Features
The numbering of the product features refers to
the illustration of the glue gun on the graphics
page.
1 Nozzle
2 Heat protection cover
3 Glue stick
4 Feed trigger
5 Support stand
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Glue Gun
Article number
Rated power input
– for heating up
– for maintaining heat
Heating time
Gluing temperature
Gluing capacity g/min
Glue stick diameter
Glue stick length
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your glue gun. The trade names of individual glue guns
can vary.
PKP 18 E
0 603 264 5..
W 200
W 16
min 7
°C 200
20
mm 11
mm 45–200
kg 0.35
/II
Bosch Power Tools