Husqvarna LC 141iV Manuel D'utilisation page 17

Do not touch a cut or
•
damaged power cord until the
electrical supply is
disconnected.
Do not repair a cut or
•
damaged power cord. Replace
it with a new one.
Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you use the product.
For model LC 141iV, LC 141i:
•
To prevent accidental start
during maintenance, turn the
safety key to 0 and remove the
battery. Wait at minimum 5
seconds before you start the
maintenance.
For model LC 141C: To
•
prevent accidental start during
maintenance, disconnect the
power cord.
Do the maintenance work
•
correctly to increase the
lifetime of the product and
decrease the risk of accidents.
Let an approved service agent
do the professional repairs.
Speak to your nearest service
agent for more information.
Only do the maintenance work
•
written in this operator's
919 - 001 - 19.10.2018
manual. More extensive work
must be done by an approved
service agent.
Put on heavy duty gloves
•
when you use the cutting
equipment. The blade is very
sharp and cuts can easily
occur.
Keep the cutting edges sharp
•
and clean for the best and
safest performance.
Let your service agent
•
regularly examine the product
and make necessary
adjustments and repairs.
Replace damaged, worn or
•
broken parts.
Obey the instructions for how
•
to change accessories. Only
use accessories from the
manufacturer.
When not in operation, keep
•
the product, battery and
battery charger apart in a dry,
indoor and locked area. Make
sure that children and persons
that are not approved cannot
get access to the product,
battery or battery charger.
17