Power Saving Function - Sony Trinitron CPD-120AS Mode D'emploi

Power Saving Function

This display meets the power saving guidelines set by the International
E S
NERGY TAR Program. It is capable of reduced power consumption
when used with a computer equipped with Display Power Management
Signaling (DPMS). By sensing the absence of the sync signal coming
from the computer, it will reduce the power consumption as follows:
CAUTION
The Power Saving function will automatically put the display into Active-off state if the
power switch is turned on without any video signal input. Once the horizontal and vertical
syncs are sensed, the display will automatically return to its Normal operation state.
State
Normal
1
operation
Suspend (1st step
2
of power saving)
Active-off (2nd
3
step of power
saving)
Power-off
4
Note
1) To lower the power consumption to 0 W, disconnect the power cord.
Required
Power
resumption time
consumption
—
CPD-120AS
130 W (max)
—
CPD-220AS
150 W (max)
15 W (max) Approx. 3 sec.
10 W (max) Approx. 10 sec.
1)
—
Approx. 10 W
u Power
Speaker
indicator
Green
On
Green
On
Off
Green ˜
Orange
Off
Orange
Off
Off
Power Saving Function
GB
27