Setting The Ph Level; Setting The Disinfectant Potential Of The Water (Orp); Recommended Ph/Orp Values - Teuco Seaside 641 Manuel De L'utilisateur

SETTING THE DISINFECTANT POTENTIAL OF
THE WATER (ORP)
SETTING THE ORP LEVEL
Users can set ORP levels as follows:
- open the automatic treatment menu by clicking
on the relevant icon.
- select SET.
- place the cursor over the previous ORP value
(ORP SET) and change it if required, selecting a
setting from the permitted range.
This operation also makes it possible to make a
quick comparison with the actual ORP value, as
detected by the probe.

RECOMMENDED pH/ORP VALUES

REMEMBER THIS RULE: pH xx => the chlorine
is more active (i.e., it acts faster and is used up
more quickly). pH xx => the chlorine less active
(i.e., it acts more slowly and is used up more
slowly).
AUTOMATIC WATER TREATMENT
PH
INTENSIVE
7 - 7.2
USE
DOMESTIC
7.2
USE
7.4
EN
15sec.
ORP
750
650-750
9