Setting The Electrolysis System To Off; Setting The Electrolysis System To Manual Mode; Setting The Electrolysis System To Automatic Mode - Teuco Seaside 641 Manuel De L'utilisateur

SETTING THE ELCTROLYSIS SYSTEM TO OFF
This operation is needed whenever probe
maintenance is required or when waiting for any
salt to dissolve completely in the water.
SETTING THE ELECTROLYSIS SYSTEM TO
MANUAL
The manual operation mode is recommended
when hyperchlorination is considered useful or
after intensive product use.
After 20 minutes' operation, the system returns to
automatic operating mode.
SETTING THE ELECTROLYSIS SYSTEM TO
AUTOMATIC
The automatic operation mode is the recommended
mode. The water parameters are kept under
constant control.
STAND-BY STATUS OF THE ELECTROLYSIS
SYSTEM
During operation of the whirlpool baths, it is
automatically in stand-by: in this status, the system
momentarily prohibits the production of chlorine.
AUTOMATIC WATER TREATMENT
15sec.
EN
15sec.
15sec.
15sec.
15sec.
15sec.
15sec.
15sec.
7