Saeco LAVAZZA PREMIUM Mode D'emploi page 16

E N
Wash the removed part with lukewarm water to remove any resi-
duals of milk.
Clean the hole in the upper area carefully. Through this operation you
will always be able to brew excellent cappuccinos.
Clean the fi xed part installed on the steam / hot water wand with a
damp cloth.
At the end, assemble the outer part again. Make sure this component
is inserted up to its limit stop to prevent it from sliding away during
operation.
After cleaning, we recommend dispensing some steam to complete the
process.
DESCALING
Limescale normally builds up with extended use of the appliance;
the machine needs descaling every 3 - 4 months and/or whenever a
reduction in water fl ow is noticed.
In case of con ict, priority must be given to what is indicated in the
operation and maintenance manual over the instructions provided on
separately sold accessories and materials.
Use the Saeco descaling product. Its formula has been desig-
ned to ensure better machine performance and operation for
its whole operating life. If correctly used, it also avoids alte-
rations in the brewed product. The descaling solution must
be disposed of according to the manufacturer's instructions
and/or regulations in force in the country of use. Note: if the
optional water fi lter is used, REMOVE IT BEFORE DESCALING.
Never drink the descaling solution or any products dispensed until
the cycle has been carried out to the end. Never use vinegar as a
descaling solution.
Remove the water tank and empty it out.
1
Pour HALF the content of the Saeco concentrated descaling solution
2
into the water tank, and then fi ll it with fresh water up to the MAX
MAINTENANCE AND CLEANING
level indicated.
Turn the machine on and place a container under the steam / hot
3
water wand.
Turn the steam / hot water knob to the open position.
4
EXTRA:
5
ter (about 150 ml each).
PREMIUM:
the manual brew button to dispense two cups of water (about 150
ml each).
Then close the knob and turn off the machine.
6
Let the descaling solution sit for about 15-20 minutes with the ma-
7
chine off .
Turn on the machine by pressing the main switch and perform the
8
operations described in steps
minutes.
Repeat the operations described in step
9
completely empty.
Rinse the tank with fresh drinking water and fi ll it up.
10
Turn on the machine by pressing the main switch. Dispense the whole
11
content of the tank through the steam / hot water wand. Use a suita-
ble container.
When water is fi nished, fi ll the tank again and repeat the operations
12
described in step
press the coff ee brew switch and dispense two cups of wa-
wait for the brew buttons to be steadily on, then press
. Then keep it off for 3
, and
4 5 6
until the water tank is
8
. Once fi nished, the descaling cycle is complete.
11