Technical Data - Jonsered B2126 Manuel D'utilisation

• If the spark plug is dirty, clean it and make sure that
the electrode gap is correct, see
on page 12 .(Fig 29. )
• Replace the spark plug if it is necessary.
T T o do the maintenance to the air filter
To clean the air filter
1. Remove the air filter cover and remove the air filter.
(Fig 30. )
Engine Specifications
Cylinder displacement
Electrode gap
Fuel tank volume
Idling speed
Maximum power speed
Power output
Spark plug
Maximum speed blow mode
Maxiumum speed vaccum mode
Emission durability period
Noise and Vibration Data
Equivalent vibration level at handles equipped with blower
tubes and nozzle (original)- see note 1
Equivalent vibration level at handles equipped with vaccum
tubes (original), left/right - see note 1
Equivalent sound pressure level at the operators' ear measured
according to ISO 22868 equipped with blower tubes and nozzle
(original)
Equivalent sound pressure level at the operators' ear measured
according to ISO 22868 equipped with vaccum tubes (original)
Sound power level, guaranteed (L
Sound power level, measured - see note 2
Product Dimensions
Weight (without fuel but with blower tube and standard nozzle
fitted)
12

TECHNICAL DATA

TECHNICAL DATA
) - see note 2
WA
2. Clean the air filter with warm soap water. Make sure
that the air filter is dry before you install it.
3. Replace the air filter if it is too dirty to fully clean it.
Always replace a damaged air filter.
4. If your product has a foam air filter, apply air filter oil.
Only apply air filter oil to a foam filter. Do not apply
oil to a felt filter.
unit B2126
(125B28HV)
3
cm 28
mm 0.6
3
cm 500
-1
min 2800 - 3200
-1
min 8000
kW 0.8
RCJ-6Y
-1
min 8600
-1
min --
h 50
2
m/s 8.3
2
m/s --/--
dB(A) 94
dB(A) --
dB(A) 107
dB(A) 106
kg 4.3
BV2126
(125B28HV)
28
0.6
500
2800 - 3200
8000
0.8
RCJ-6Y
8600
7500
50
8.3
6.4/8.3
99
99
107
106
4.4
239 - 001 - 06.07.2017