i-tec CHARGER-C60WPLUS Mode D'emploi page 3

i-tec USB-C CHARGER 60W + USB-A Port 12W
INTRODUCTION
This universal USB-C 60 W power adapter is a great choice for powering any
laptop or other device equipped with a USB-C connector that supports USB-C
Power Delivery, with a maximum power demand of 60 W. The voltage is set
automatically according to the USB Power Delivery specification 2.0 v1.2 in
the individual profiles in the following steps: 5V / 9V / 12V / 15V / 19V / 20V,
with max. 3 A current consumption. Another excellent feature of this adapter
is the additional USB-A output (5V, max. 2.4 A), which can be used to power
most devices charged via USB (i.e. MP3 players, Bluetooth hands-free, digital
picture frames, most Android mobile phones, Apple iPhone, iPad, iPod, GPS
navigation units, etc.). The power adapter is lightweight and easily portable;
it is equipped with intelligent current overload, overvoltage, and short circuit
& overheating protection.
CONTENTS
• 1x 60W Universal adapter
• 1x USB-C power supply cable 180 cm
• 1x User manual
SPECIFICATIONS
• Input voltage AC 100-240V, 50-60 Hz, max. 1.3 A
• Output power (max): 60 W
• Efficiency: more than 86 %
• USB-C output voltage: DC 5V / 9V / 12V / 15V / 19V / 20V
• USB-C output current: max. 3 A
• USB-A output voltage: DC 5 V
• USB-A output current: max. 2.4 A
• Protection against: current overload, overvoltage, short circuit and
overheating.
• Operating values: 0 °C – 40 °C
• Relative humidity: 20% – 80%
• Product dimensions: 107 x 70 x 30 mm
• Product weight: 180 g
• Package dimensions: 120 x 150 x 40 mm
• Package weight: 315 g
USING THE POWER ADAPTER
Connecting the universal adapter to the device:
1. Connect the adapter to the 110/230V mains, using the supplied cable.
2. Connect the USB-C cable to the USB-C port on the power adapter.
3. Connect the USB-C cable to the charging USB-C port on the device.
4. The LED indicator will illuminate and charging will begin.
Note: When powering mobile phones and similar devices without a USB-C
connector, you can use the USB-A port on the adapter. Power over the USB-A
port is provided on the assumption that the given device supports it.
4 | ENGLISH
IMPORTANT SAFETY MEASURES:
• Do not pull the power supply cable from the mains socket by pulling the
cable.
• Do not connect to or pull the power cord from the socket with wet hands.
• Do not connect the adapter if it is damaged (e.g. short circuit, burnt PVC
case).
• Immediately disconnect the adapter from the mains socket should you
smell burning.
• Do not disassemble this device or make modifications, as this could case
a fire risk, injury or damage to personal property. Entrust all repairs to the
manufacturer, i-tec Technologies s.r.o..
• Do not expose the adapter to direct sunlight, place it on heating elements,
or on any other heat. Do not cover it with paper or any other material that
could influence air circulation.
• Do not use the adapter in an environment with a temperature below 0°C or
higher than 40°C. Use in ventilated areas only.
• Do not place the adapter on heat-sensitive surfaces.
• Make sure your power supply provides the required voltage (V) and
frequency (Hz).
• Do not use the adapter with damaged supply cord, cable or fuses.
• Keep away from children.
• Ensure the output voltage of the power adapter is suitable for your device.
• This power adapter supports output of up to 60W. Before use, please
check the maximum input of your device.
• This power adapter will not charge devices that have a maximum power
input of more than 60 W.
• Disconnect the device from mains power if you do not use it for a
prolonged period of time.
WARRANTY
A standard 24-month warranty is provided on this product . The warranty is
void if the device is:
• exposed to liquid
• damaged by shock, fall, or by any other mechanical damage
• placed near fire
• visibly damaged by any unauthorized modification or improper handling
• has damaged cables
• used for powering of devices requiring input higher than the specified 60W
Quick Start
ENGLISH | 5