Routing The Electric Cables; Inspection And Maintenance; Dispose Of Old Appliance - Salvis ProfiLine PL881000 Mode D'emploi

en
9.3.2

Routing the electric cables

Mains
connecti
terminal
10.

Inspection and Maintenance

● Have the appliance inspected and serviced on a regular basis. Maintenance tasks include: safety,
function and leak testing.
● Have the safety equipment inspected by a technical expert at least once a year to ensure that it is
in proper condition. The result of this check must be documented and retained.
● Installation, service and repair tasks may only be carried out by professional electricians.
● Use only genuine accessories and spare parts!
● We recommend negotiating a service contract with Customer Service.
11.

Dispose of old appliance

● Before dismantling, switch off the appliance at the mains and safeguard it against being switched
back on. Then disconnect the mains cable from the mains socket and from the appliance.
● Old appliances are not worthless rubbish! Valuable raw materials can be reclaimed as a result of
environmentally friendly waste disposal.
● Observe the relevant legal requirements when disposing of the appliance.
● Commercial electrical appliances must not enter the municipal waste disposal system or be dis­
posed of with household waste.
24 / 36
Strain relief for
cable
on
Retaining
plate
Cable entry
Nut
through rear wall
or bottom
DANGER! Hazardous electric voltage!
Risk of electric shock that may result in serious injury or death!
● Maintenance tasks on electrical appliances must only be carried out by authorized
customer service or qualified electrician!
. Switch off the appliance and secure it against switching on!
Option of routing the cable through the rear wall or
from below.
. Install edge protection to the panel
leadthroughs.
● Do not route the electric cable along hot sur­
faces or sharp edges!
Dismantle the retaining plate to make the
connection
. Loosen the nut on the retaining plate.
. Swivel the retaining plate to the side and pull
out toward the front.