Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
Warning for the safety of people and property ...... 11
1. General points .................................................. 12
2. Handling ............................................................ 12
3. Installation ........................................................ 12
4. Start-up ............................................................. 13
5. Operation .......................................................... 14
6. Filterwatch function ......................................... 14
7. Advanced configuration .................................... 15
8. Built-in timer ...................................................... 15
9. Maintenance ..................................................... 15
10. LED indicators .................................................. 16
11. Declaration of compliance .................................. 3
12. Illustrations........................................................ 47
Warning for the safety of people and property
The following symbol
indicates the possibility of danger as a result of not
following the corresponding instructions.
DANGER
Not following this instruction
electrocu-
leads to a risk of electrocu-
tion risk
tion.
DANGER
Not following this instruction
leads to a risk of injury to
people or damage to property.
WARNING
Not following this instruction
leads to a risk of damage to
the pump or the installation.
1. GENERAL POINTS
This manual is complementary to the standard in-
stallation manual for the swimming pool pumps.
The instructions we provide are intended to ensure
the proper installation and optimum performance of
swimming pool water circulation pumps equipped
®
with
Silenplus
frequency
®
ControlSystem
valve position sensor.
Read these instructions before installing.
Keep them for future reference.
Following the installation and usage instruc-
tions and the electrical connection diagrams
correctly ensures that the equipment will
work properly.
Ignoring any of the instructions in this manual
can lead to all kinds of consequences for
which we accept no responsibility.
1.1 Product description
Silenplus pumps equip a standard electric motor
with a built-in frequency inverter. They are designed
for a single phase connection.
They have a radio-frequency transmitter to com-
municate
with
the
ControlSystem
®
Bluetooth
connection for remote control using
smartphone applications.
®
The ControlSystem
sensor is the position detec-
tor for a standard swimming pool filter 6-way
multiport valve. It is equipped with electronic sen-
sors for polar positioning and to control the motor.
beside a paragraph
inverter
and
®
and
a
12
The joint working of Silenplus pumps and the
ControlSystem enables full control of the pump
functions just by operating the filter valve.
®
1.2 Silenplus Evopool
Filtration Plus:
System which achieves filtration opti-
misation to increase efficiency, with the
resulting electricity saving, while adding
a cycle to increase the effectiveness of
pool surface cleaning.
EFFECTIVENESS: work cycles specially developed
for use in pools achieve maximum effectiveness.
SAVINGS: a minimum of 80% electricity savings
over standard pumps, with the resulting cost sav-
ings.
Backwash Plus:
Backwash system which, thanks to a
specially developed cycle, increases
process
efficiency
cleaning time, drastically reducing the
amount of water used for efficient
cleaning.
EFFECTIVENESS: reduction of backwash time and
improved filter-cleaning efficiency.
SAVINGS: a minimum of 25% water savings over
standard pumps.
Filterwatch:
The rotational speed of the pump automatically
adapts to the normal and progressive clogging of
the filter so as not to reduce the effectiveness of the
Filtration Plus function.
2. HANDLING
It is supplied in suitable packaging to prevent it de-
teriorating during transport. Before unpacking the
product, check that the packaging has not suffered
damage or is misshapen.
Handle the product carefully, with the right
tools.
3. INSTALLATION
This equipment is designed for use indoors.
3.1. Pump installation.
WARNING: Follow the installation manual in-
structions for the standard pump.
3.2. Electrical connection
The electrical installation must have a multi-
ple separation system with a 3mm contact
opening.
The system's protection will be based on a
differential switch (Δfn = 30 mA).
The equipment is supplied with a power cable with
plug.
Do not manipulate the equipment.
EN
functions
while
shortening
Publicité
Chapitres
Table des Matières
