Maintenance; Transportation, Storage And Disposal; Technical Data - Husqvarna SR600-2 Manuel D'utilisation

Introduction
Below you will find some general maintenance
instructions. If you need further information please
contact your service workshop.
To perform maintenance on the
attachment
CAUTION: Working on the sweeper is often
done in dusty conditions. If you have a
gasoline operated product it is extremely
important to take care of air filter
maintenance regularly, often daily. The air
filter must be oiled to work satisfactorily.
Refer to the operator's manual of the power
unit for maintenance instructions.
WARNING: The gear housing gets hot when
the machine has been in use. To avoid
Transport and storage
If transporting the attachment on another vehicle always
use approved securing devices and make sure that the
attachment is securely held.
Technical data for gasoline operated products
Sweeper
Brush drum width, mm
Weight
Weight, kg
1
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
1
Noise emissions in the environment measured as sound power (L
EC. Reported sound power level for the machine has been measured with the original cutting attachment that
gives the highest level. The difference between guaranteed and measured sound power is that the guaran-
teed sound power also includes dispersion in the measurement result and the variations between different
machines of the same model according to Directive 2000/14/ EC.
8

Maintenance

Transportation, storage and disposal

Technical data

dB (A)
WA
burning yourself do not touch the gear
housing.
1. Make sure that the brush drums do not rotate when
the throttle/power trigger is released.
2. Check that the brush drums are not damaged or
cracked. Replace the brush drums if necessary.
3. Hang up the brush when in storage for long periods.
Ensure the attachment is cleaned and that a complete
service is carried out before long-term storage.
) in conformity with EC directive 2000/14/
WA
590
6.5
105
109
746 - 002 - 13.12.2019