dirna Bergstrom Bycool Green Série Manuel De L'utilisateur page 9

DINAMIC 1.2
EN
Air conditioning for vehicles
Function F0 Manual Operation of the equipment
F0: The user can choose the comfort temperature and change the speed of the unit blower.
The comfort temperature is controlled by briefly pressing the keys of control panel (15/
27 ºC - 59/80 ºF) or in remote control.
Blower speeds are controlled by holding down the keys of control panel, or in
remote control, the following symbols will appear on the display: V1, V2, V3, V4, V5.
Function F1 - Digital thermometer function
In this function, the Dinamic 1.2 will indicate on the screen the temperature inside the cabin.
Function F2 - Time Programming Function
F2 programmes the unit to disconnect automatically during a period of time between 1 and
pressed until F2 appears on the screen,
9 hours. To programme it, keep the On/ Off key
select the operating time with the keys and confirm by pressing On/ Off .
Function F4 Automatic Operation of the Unit
Selecting F4 will display CA alternating with the selected temperature (between 15/27°C -
59/80ºF). Users can select comfort temperature manually.
With this function, the unit automatically adjusts its functions until the selected comfort
temperature is reached.
F6 Function: ºF Selection
key pressed down until the display shows F6,
To activate this function, keep the ON/OFF
and then release the key to directly enable ºF. To return to ºC, keep the key on the control
C
panel pressed down with the display flashing , when it stops flashing, press the
key on the control panel. On switching to ˚C, the control unit is deprogrammed. To
reprogram it, follow the procedure indicated in the section 'updating the control unit'.
9