Control Panel - dirna Bergstrom Bycool Green Série Manuel De L'utilisateur

DINAMIC 1.2
EN
1.- On/off: Switching the unit On - Off and mode selection F4,F0,F1,F2,F6
2.- Temperature selector (15/27°C - 59/80ºF), air speed, control programming and
degrees Fahrenheit. Atmospheric temperature and blower speed control (between 1st
and 5th speed) in manual mode only.
3.- Display: Screen showing the function selected and the status of the equipment.
4.- LED ON/OFF: The ON/OFF key LED shows the status of the compressor:
flashing indicates that the compressor is running, static means the compressor is
shutdown.
• On connection, the equipment checks the leds and 88--
turns off.
Special display messages (please see failure Diagnosis):
88: "Technical Control" Battery low (will bleep for 30 secs. and the unit will turn off)
EO: Poor contact of the sensor recirculation wires or the sensor is damaged.
E6: Poor contact of the anti-ice sensor or the sensor is damaged.
To turn the Dinamic 1.2 unit on, press the On/ Off key
F4 Function (Automatic Function).
To change the function, hold down the On/ Off key
displayed, release the key on obtaining the desired function.

Control Panel

2
3
CONDITIONING
TEMP
4
Turning the Equipment On
8
Air conditioning for vehicles
ºC
ºF
1
-1 appears on the screen and
. The unit will always start up on the
. The different functions will be