ThermoTec AeroFlow MINI 650 Instructions De Montage page 15

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Return temperature:
Set the time
Use this menu to change the language of your FlexiSmart user interface.
Language
This menu item allows temperature measurement correction.
+ -
In case the room temperature being measured by the built-in sensor of the
AeroFlow® heater
Sensor probe Offset
value can be set.
The return temperature is the temperature that should
begin on your return.
15.0°C
If program is active (menu "Configuration" → Programs =
ON), the return temperature can not be selected. After
reaching the return time the heating plan will be
continued. If no time frame is active (paused heating
between two time frames), the Antifreeze temperature is
applied. So the heating plan continues as programmed.
If program is disabled, you can use the arrow keys to set
the return temperature. Confirm with OK. The status
display with the suitcase icon and the number of re-
maining days off will appear. The absence temperature
corresponds to the Antifreeze temperature.
To change the temperature for your absence, press an ar-
row key in the status display. The Temperature-overview
display appears. Change the absence temperature with
the arrow keys and confirm with OK. To deactivate the
holiday mode set "days out" to "-" (not "0"). During holi-
day mode you can change the Antifreeze temperature in
the Antifreeze menu, but this will not be applied for the
current absence.
Select the current weekday and confirm with OK.
Monday
Select day
Use the arrow buttons to set the current hour. Confirm
Set the time
with OK. After this, set the current minute and confirm
09:00
with OK as well.
Use the arrow buttons to select one of the available
languages. Confirm with OK.
English
Language
deviates from the real room temperature, a compensation
If for instance the
temperature, use the arrow buttons to increase the
+ 1.0
value of compensation. Example:
Sensor probe Offset
• Room temperature = 21°C
• Displayed temperature = 20°C
• Set +1 and confirm with OK.
AeroFlow® heater
indicates a lower
15

Publicité

Table des Matières
loading

Produits Connexes pour ThermoTec AeroFlow MINI 650

Table des Matières