Time Display; Alarm Clock - Bresser National Geographic 90-67000 Mode D'emploi

6.4 TIME DISPLAY

While in the normal time display mode, you can change the following
modes by pressing the [MODE] button:
• Time with seconds
• Time with weekday
• A second time zone with weekday
• A second time zone with seconds
• Date
6.5 HOW TO DISABLE THE RECEPTION OF THE
RADIO-CONTROLLED CLOCK
If you are using the device outside the central European time zone, you
may disable the reception of the radio-controlled clock. Press ▲ for 3
seconds to enable or disable the radio-controlled reception.
When disabled, the reception icon [

7. ALARM CLOCK

7.1 HOW TO SET AND ACTIVATE THE ALARM
Three different alarm functions are available:
w
[ ] Weekday alarm: This alarm will be active on every weekday
(Monday to Friday).
s
[ ] Single alarm: This alarm will only be activated once.
This function is ideal for the weekend (Saturday and Sunday).
[Pre-AL] Pre-alarm: You can wake up earlier, when the outside tempera-
ture drops to 0°C or below. You can choose between the fol-
lowing alarm time differences: 15, 30, 45, 60 or 90 minutes.
The [Pre-Alarm] can be used with both the weekday and single
alarm, if one of them is activated.
To set an alarm:
1. Choose which one of the three alarm functions you would like to
activate by pressing [ALARM].
] will disappear.
EN
37