Temperature Alarm - Bresser National Geographic 90-67000 Mode D'emploi

5.2 HOW TO READ THE KINETIC WAVE DISPLAY
The kinetic wave display shows the signal-receiving status of the base
station. There are three possible icons:
The unit is in searching mode
Normal reception
No signals received for more than
15 minutes
5.3 MAXIMUM AND MINIMUM
TEMPERATURE AND HUMIDITY
The maximum and minimum recorded indoor temperature, humidity and
outdoor temperature will be automatically stored in the device's memory.
Press [MEM] once to display the maximum readings and again to dis-
play the minimum readings. The respective indicators [MAX] or [MIN]
will be displayed with the appropriate data. To clear the memory, hold
down [MEM] for 2 seconds. The maximum and minimum readings will
be erased. If you press [MEM] now, the maximum and minimum read-
ings will have the same values as the current ones until different readings
are recorded.

5.4 TEMPERATURE ALARM

The weather station is equipped with a temperature alarm that will sound
when a user-defi ned temperature is reached. When the selected tem-
perature is reached an acoustic alarm will be initiated.
The temperature alarm is programmed as follows:
1. Press the [TEMP ALARM] button.
2. Hold the [TEMP ALARM] button for 2 seconds.
3. Select the desired temperature for the alarm by pressing▲ or ▼.
To confi rm the data, press [TEMP ALARM] once again.
34
˚C