Display Brightness Regulation; Technical Data; Ec Declaration Of Conformity; Ukca Declaration Of Conformity - National Geographic 9070710 Mode D'emploi

19 Display brightness regulation

1. When using battery power, press the SNOOZE/LIGHT button to activate the display for about 7
seconds.
2. In mains operation (DC 5V), touch the SNOOZE/LIGHT touch surface several times to set the de-
sired display brightness in steps: dim - bright - off
3. NOTE! It is not possible to adjust the display brightness in battery operation.

20 Technical data

Base unit
Power supply
Temperature unit
Temperature measuring range
Humidity measuring range
Time display
Time format
Calendar display
Time signal
Dimensions
Weight (incl. batteries)
Wireless sensor
Batteries
Maximum number of sensors
RF transmission frequency
RF transmission range
Maximum RF power
Temperature measuring range
Humidity measuring range
Dimensions
Weight (incl. batteries)

21 EC declaration of conformity

A "Declaration of conformity" in accordance with the applicable directives and correspond-
ing standards has been prepared by Bresser GmbH. The full text of the EC declaration of
conformity is available at the following Internet address: www.bresser.de/down-
load/9070710/CE/9070710_CE.pdf

22 UKCA Declaration of Conformity

Bresser GmbH has issued a "Declaration of Conformity" in accordance with applicable
guidelines and corresponding standards. The full text of the UKCA declaration of conform-
ity is available at the following internet address: www.bresser.de/download/9070710/
UKCA/9070710_UKCA.pdf
24 / 52
5V DC 150mA USB power plug
Backup: 3x AAA
°C/°F
from -10°C to 50°C
RH 20% to 90 %
HH:MM
12 or 24 hours
DD/MM
DCF
140 x 26 x 143 mm (W x H x D)
273 g
2x AA, 1.5V
3
433 MHz
100 m
< 10mW
from -50°C to 70°C
RH 20% to 90 %
38 x 20 x 100 mm (W x H x D)
33 g