Troubleshooting Minor Problems - Siemens TC911P2 Notice D'utilisation

Table des Matières

Publicité

Rinse out thermo carafe 7, wipe the
S
outside with a damp cloth.
Important: Do not stir the liquid inside the
glass interior of thermo carafe 7 using pointed
or hard objects and do not reach inside it as
there is a danger that it may break and also a
risk of injury.
Descaling
If right hand aroma selection button 13 is
flashing,
this indicates that the appliance
needs to be descaled.
Tip: It is advisable to descale the coffee maker,
regardless of the descaling indicator, if the
brewing time takes considerably longer or
more steam is produced than normal.
Regular descaling
- prolongs the service life of the coffee
maker
- guarantees faultless operation
- avoids an excessive formation of steam
- shortens the brewing time
- saves energy
The coffee maker should be descaled using a
commercially available descaler.
Place thermo carafe 7 in the coffee maker
S
with its lid closed.
Measure out the descaler in accordance
S
with the manufacturer's instructions and
add it to the reservoir.
Caution: Do not fill with more than 6 cups
of liquid.
Press and hold aroma selection button 13
S
and switch 11 for at least 3 seconds
to start the descaling program. Aroma
selection button 13
of ring lamp 10 flash for the duration of the
descaling program.
The descaling program is complete once the
button and ring lamp stop flashing. Swivel
plate 8 automatically swivels into the serving
position.
and the right half
Info: The indicator remains lit if the descaling
process is interrupted before it is complete or
if the process was not carried out in
accordance with the instructions.
When descaling has ended, operate the
S
coffee maker twice using clean water
without any ground coffee. Do not fill with
more than 6 cups of water.
Carefully rinse all loose components and
S
thermo carafe 7.

Troubleshooting minor problems

The faintly lit ring lamp 10 flashes after switch
11 is used to start the brewing process →
swivel plate 8 is not fully engaged in the
brewing position.
Click the swivel plate into position.
S
The coffee maker switches off before the end
of the brewing process → the coffee maker is
heavily furred.
Descale the automatic coffee maker in
S
accordance with the instructions.
Drip stop 4 is leaking → drip stop 4 is dirty.
Clean drip stop 4 (in filter 5) under running
S
water while operating drip stop 4 several
times with your finger.
Disposal
This appliance is marked in accordance
with European Directive 2002/96/EC (waste
electrical and electronic equipment WEEE).
This directive provides the EU wide legal
foundation for the return and recycling of used
appliances.
For current disposal methods, please enquire
at your specialist dealer.
Subject to amendment
7

Publicité

Table des Matières
loading

Table des Matières