Menu System - Kenwood KDC-MP342U Mode D'emploi

Menu System

Set up the following functions.
Item Setting
"CODE SET"/
"CODE CLR"
1
"SKIP"* "0.5%"*/ "1%"/
"5%"/ "10%"
"DIM" "OFF"*/ "ON"
"ICON" "OFF"/ "ON1"/
"ON2"*
"SWPRE" "R"*/ "SW"
"SPRM" "OFF"/ "ON"*
"AUTO1"/ "AUTO2"/ "AUTO1"*/ "AUTO2"/
"MANUAL" "MANUAL"
"CRSC" "OFF"/ "ON"*
"AUTO1"/ "AUTO2"/ "AUTO1"*/ "AUTO2"/
1
"MANUAL"* "MANUAL"
1
"HDR MODE"* "AUTO"*/ "DIGITAL"/
"ANALOG"
"CHANNEL"/ "CHANNEL"*/
1
"PRESET"* "PRESET"
1
"ESN="*
"NAME SET"
"SCL" "AUTO"*/ "MANU"
"AUX" "OFF"/ "ON1"*/
"ON2"
"CD READ" "1"*/ "2"
"DEMO" "OFF"/ "ON"*
*Factory setting
* 1 Function of KDC-MP342U
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
6
|
KDC-MP342U/ KDC-MP242U
Entry Setting overview
1 sec.
Sets/Resets security code.
Sets the ratio of skip performed with <Music Search for iPod>.
Adjusts the brightness of the display according to the surrounding
illumination.
Sets the Graphics mode of the display.
Sets the preout output.
Turns ON/OFF the Supreme function.
Selects the tuning mode of the radio.
Switches to Monaural to decrease noise when reception is poor.
Sets the tuning mode of HD radio.
1 sec.
Sets the receive mode of HD Radio.
Sets the seek mode of satellite radio.
Displays the Electronic Serial Number of satellite radio.
1 sec.
Sets the display when switched to AUX source.
Specifies whether the text is scrolled automatically.
Sets whether to display AUX during source selection.
Sets the CD read mode.
2 sec.
Specifies whether to enable demonstration.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
1
Enter menu mode
Press the Search button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Press the [FM+] or [AM–] button.
3
Set the menu item
Press the [4] or [¢] button.
4
Exit menu mode
Press the Search button.
Condition Page
12
9
—
17
17
17
17
17
13
14
8
—
17
17
— 13