Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Extinguishing
When you decide to stop burning and most of the fuel is burnt, you may center the combustion air lever
in the middle ( point zero )
You will still find some remains from wood and carbon on the grill, but this is perfectly normal. Make
sure they are cooled off significantly before removing the ashes and commencing to clean the stove.
7
M
AINTENANCE
In order to keep the life expectancy of your stove as high as possible, we advise you to do a yearly
check-up and maintenance. When it is frequently used, it is advisable to do little cleaning chores on
frequent basis, such as emptying the ash tray / grill and cleaning the window.
Annual maintenance is best executed by your technical installing company
Maintenance and cleaning may only be done when the stove and its fuel has cooled
down !!
Remains of carbon may remain on the grill after having burnt the last time. It is not always necessary to
remove those completely, as in the next combustion they will help the other carbon to reach the correct
burning temperature.
Emptying the ash tray
Clean the ash tray regularly. Don't let slacks occur so cooling down the grill is prevented. When
insufficient air can cool down the grill, it will start glowing and make sure that it doesn't last at long as it
should.
When cleaning the ash tray, us the handle that was delivered together with the stove.
64

Publicité

Table des Matières
loading

Table des Matières