Saey Duo MF Notice D'installation Et D'utilisation page 62

Extinguish
When you decide to stop burning and all white-yellow flames are gone, you may center the combustion
air lever in the middle ( point zero )
You will still find some remains from wood and carbon on the grill, but this is perfectly normal. Make
sure they are cooled off significantly before removing the ashes and commencing to clean the stove.
6.5 Use of Coal
When you want to use the Saey Duo on coal you should mount a coal bunker (1) as shown on the
figure. Do this by opening the filling cover.
Making some fire
Burning on coal requires to start with some wood kindling, which means that we should first start to
control the combustion air for wood.
Make sure that both the thermal Bimetal and the combustion
-
control lever are to the right
If necessary, first clean the ash tray and combustion chamber
-
Place some logs of wood in the stove to light up the fire ( 1-1.5
-
kg in total )
On top of that put some kindling, disperse them and light it.
-
When lighting the fire, leave the door a little open for a few
-
minutes.
When you have a good flame, firmly close the door
-
Let the fire burn until all wood is burnt and changes in really
-
glowing fuel.
Now, open the filling cover with the handle and fill the coal
-
bunker with approximately 1 kg of coal and reclose the cover
afterwards.
62